VRX900 Series
SKU VRX918SP
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 18" |
| Specifications | |
| Frequency Range (-10 dB) | 31 Hz - 220 Hz |
| Frequency Response (±3 dB) | 34 Hz - 220 Hz |
| Maximum Peak Output | 126 dB SPL at 1m |
| LF Driver | 1 x JBL 2268FF, 457mm (18 in) dual voice coil Differential Drive® woofer, neodymium magnet |
| Bandpass Nominal Impedance | LF: 2 x 2 ohms |
| DPC-2 Internal Amplification Output (nominal load) | 1500 Watts Peak, 750 Watts Continuous |
| DPC-2 Output (IEC shaped pink noise, rated load) | LF: 750 Watts |
| DPC-2 Output Section | LF: Dual-Bridged Technology™, Class D |
| Audio Input Connector | XLR with loop through |
| User Controls | Input attenuator (0-16 dB); selectable 80 Hz or 120 Hz low pass; 80 Hz high-pass enable/disable for XLR loop-thru |
| Signal Processing | DSP based, resident in Input Module |
| System Management | DSP based limiters for mechanical and thermal protection |
| AC Power Operating Range | 90-132 VAC or 216-264 VAC, 50/60Hz |
| AC Line Voltage | User selectable: 120V/240V (-15%, +10%) |
| AC Current Requirements | 6A per system at 120V, 3A per system at 240V |
| AC Input Connector | Neutrik PowerCon (NAC 3MPA) |
| AC Loop Through Connector | Neutrik PowerCon (NAC 3MPB) |
| Enclosure | 18mm birch plywood |
| Suspension / Mounting | Optional VRX-AF line-array frame kit or 10mm forged eyebolts |
| Finish | Black DuraFlex™ finish |
| Grille | Powder coated, black, 16-gauge perforated steel with acoustically transparent foam |
| Dimensions (H x W x D) | 508mm x 597mm x 749mm (20.0 in x 23.5 in x 29.5 in) |
| Optional Accessories | VRX-AF array frame, SRX718S-CVR cover, SS4-BK pole, WK-4S caster kit |
| Additional Specifications | |
| Configuration | Subwoofer |
| Mounting Information | |
| Net Weight | 38.5 kg / 85 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 18" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 31 Hz - 220 Hz | AC Power Operating Range | 90-132 VAC or 216-264 VAC, 50/60Hz |
| Frequency Response (±3 dB) | 34 Hz - 220 Hz | AC Line Voltage | User selectable: 120V/240V (-15%, +10%) |
| Maximum Peak Output | 126 dB SPL at 1m | AC Current Requirements | 6A per system at 120V, 3A per system at 240V |
| LF Driver | 1 x JBL 2268FF, 457mm (18 in) dual voice coil Differential Drive® woofer, neodymium magnet | AC Input Connector | Neutrik PowerCon (NAC 3MPA) |
| Bandpass Nominal Impedance | LF: 2 x 2 ohms | AC Loop Through Connector | Neutrik PowerCon (NAC 3MPB) |
| DPC-2 Internal Amplification Output (nominal load) | 1500 Watts Peak, 750 Watts Continuous | Enclosure | 18mm birch plywood |
| DPC-2 Output (IEC shaped pink noise, rated load) | LF: 750 Watts | Suspension / Mounting | Optional VRX-AF line-array frame kit or 10mm forged eyebolts |
| DPC-2 Output Section | LF: Dual-Bridged Technology™, Class D | Finish | Black DuraFlex™ finish |
| Audio Input Connector | XLR with loop through | Grille | Powder coated, black, 16-gauge perforated steel with acoustically transparent foam |
| User Controls | Input attenuator (0-16 dB); selectable 80 Hz or 120 Hz low pass; 80 Hz high-pass enable/disable for XLR loop-thru | Dimensions (H x W x D) | 508mm x 597mm x 749mm (20.0 in x 23.5 in x 29.5 in) |
| Signal Processing | DSP based, resident in Input Module | Optional Accessories | VRX-AF array frame, SRX718S-CVR cover, SS4-BK pole, WK-4S caster kit |
| System Management | DSP based limiters for mechanical and thermal protection | ||
| Additional Specifications | |||
| Configuration | Subwoofer | ||
| Mounting Information | |||
| Net Weight | 38.5 kg / 85 lbs | ||
Questions about this speaker? Our pro audio team is here to help.