Intellivox Series
SKU JBL-DSX280DT
Top half of the two-piece Intellivox DSX280D active digital beam-shaping column loudspeaker array.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 4" |
| Specifications | |
| Frequency Response (±3 dB) | 130 Hz - 18 kHz |
| Coverage Pattern | 130° horizontal x adjustable vertical (DDS beam shaping) |
| Maximum SPL (30m, A-weighted) | 90 dB continuous, 93 dB peak |
| Dynamic Range | >100 dB |
| Transducers | 12 x 4" full-range, 4 x 1" horn-loaded dome tweeter |
| Typical Throw | 35 m |
| Analog Input Type | Transformer balanced line level |
| Analog Input Connectors | 3-way Phoenix |
| Maximum Peak Input Level | +19 dBV peak (+21.22 dBu) |
| Input Impedance | 6.8 kΩ |
| Digital Input Type | Dante, 8x8 audio channels |
| Digital Input Connectors | Two 8p RJ-45 (Primary & Secondary) |
| Amplifier Type | Class D |
| Amplifier Continuous Power | 16 x 40W RMS (4 ohm) |
| Amplifier Peak Power | 500 W |
| DSP Sample Rate | 48.0 kHz (default) |
| DSP Bit Depth | 32-bit floating point |
| DSP Latency | 3.7 ms |
| A/D, D/A Converter | 24-bit (128x oversampling) |
| Signal Processing | 21 sec pre-delay; 2x 10 sec input channel delay; equalizer and compensation filtering; volume; RMS and peak limiters on each output; ambient noise sensing autogain (fail-safe); 8x output filters + delay ring buffers |
| Network Interface Type | Ethernet through Dante |
| Network Connector | 8p RJ-45 |
| Fault Monitoring | Failure relay SPDT 125 mA / 24V, 2-way Phoenix connector |
| Fan Control | For optional external fan (24VDC / 3W max), 2-way Phoenix connector |
| Mains Voltage Range | 115V to 230V |
| AC Connector | 3p IEC |
| Max Mains Inrush Current | 25 A short-time peak (230V) |
| Current Draw | 84 VA (idle) / 407 VA (male speech STIPA) / 650 VA (full load) |
| Enclosure Material | Steel |
| Color | Enclosure and grille RAL9010 (white); speaker baffle RAL9011 (black) |
| Dimensions (H x W x D) | 2800mm x 134mm x 92mm (110.2 in x 5.3 in x 3.6 in) |
| Temperature Range | 0 to 40°C (32-104°F) |
| Shipping Weight | 32 kg (70.5 lb) |
| Environmental Standards | CE, CSA/UL, CCC; Safety EN 62368-1:2014+A11:2017; EMC EN 55032:2012/AC:2013 class A; EMC EN 55103-2:2009; Mains harmonics EN 61000-3-2:2014 |
| Included Accessories | Wall bracket (25mm), connector set |
| Optional Accessories | Swivel bracket 90°, swivel bracket 45°, cover plate, hinge bracket 90°, cover box 58mm, program set universal USB |
| Order SKU Variants | JBL-DSX280D-B (amp-at-bottom), JBL-DSX280D-T (amp-at-top) |
| Additional Specifications | |
| Mount Type | Column |
| Mounting Information | |
| Net Weight | 25 kg / 55 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 4" | ||
| Specifications | |||
| Frequency Response (±3 dB) | 130 Hz - 18 kHz | Signal Processing | 21 sec pre-delay; 2x 10 sec input channel delay; equalizer and compensation filtering; volume; RMS and peak limiters on each output; ambient noise sensing autogain (fail-safe); 8x output filters + delay ring buffers |
| Coverage Pattern | 130° horizontal x adjustable vertical (DDS beam shaping) | Network Interface Type | Ethernet through Dante |
| Maximum SPL (30m, A-weighted) | 90 dB continuous, 93 dB peak | Network Connector | 8p RJ-45 |
| Dynamic Range | >100 dB | Fault Monitoring | Failure relay SPDT 125 mA / 24V, 2-way Phoenix connector |
| Transducers | 12 x 4" full-range, 4 x 1" horn-loaded dome tweeter | Fan Control | For optional external fan (24VDC / 3W max), 2-way Phoenix connector |
| Typical Throw | 35 m | Mains Voltage Range | 115V to 230V |
| Analog Input Type | Transformer balanced line level | AC Connector | 3p IEC |
| Analog Input Connectors | 3-way Phoenix | Max Mains Inrush Current | 25 A short-time peak (230V) |
| Maximum Peak Input Level | +19 dBV peak (+21.22 dBu) | Current Draw | 84 VA (idle) / 407 VA (male speech STIPA) / 650 VA (full load) |
| Input Impedance | 6.8 kΩ | Enclosure Material | Steel |
| Digital Input Type | Dante, 8x8 audio channels | Color | Enclosure and grille RAL9010 (white); speaker baffle RAL9011 (black) |
| Digital Input Connectors | Two 8p RJ-45 (Primary & Secondary) | Dimensions (H x W x D) | 2800mm x 134mm x 92mm (110.2 in x 5.3 in x 3.6 in) |
| Amplifier Type | Class D | Temperature Range | 0 to 40°C (32-104°F) |
| Amplifier Continuous Power | 16 x 40W RMS (4 ohm) | Shipping Weight | 32 kg (70.5 lb) |
| Amplifier Peak Power | 500 W | Environmental Standards | CE, CSA/UL, CCC; Safety EN 62368-1:2014+A11:2017; EMC EN 55032:2012/AC:2013 class A; EMC EN 55103-2:2009; Mains harmonics EN 61000-3-2:2014 |
| DSP Sample Rate | 48.0 kHz (default) | Included Accessories | Wall bracket (25mm), connector set |
| DSP Bit Depth | 32-bit floating point | Optional Accessories | Swivel bracket 90°, swivel bracket 45°, cover plate, hinge bracket 90°, cover box 58mm, program set universal USB |
| DSP Latency | 3.7 ms | Order SKU Variants | JBL-DSX280D-B (amp-at-bottom), JBL-DSX280D-T (amp-at-top) |
| A/D, D/A Converter | 24-bit (128x oversampling) | ||
| Additional Specifications | |||
| Mount Type | Column | ||
| Mounting Information | |||
| Net Weight | 25 kg / 55 lbs | ||
Questions about this speaker? Our pro audio team is here to help.