Free Shipping $50+
US Speaker — Professional Audio Components
jbl logoIntellivox Series
JBL Intellivox DS115D Bottom

JBL Intellivox DS115D Bottom

SKU JBL-DS115DB

Bottom half of the two-piece Intellivox DS115D active digital beam-shaping column loudspeaker array.

Item Price:$3,500.00
shopping_cartBuy Now
local_shippingFree U.S. Shipping on Orders $50+
Overview
  • 1.15m Active Digital Beam Shaping Column Loudspeaker Array
  • Bottom half of the two-piece Intellivox DS115D active digital beam-shaping column loudspeaker array
  • Sold and shipped as a Top/Bottom pair
  • The Intellivox DS115D is an active column loudspeaker array designed for sound reinforcement and public address in reverberant spaces such as conference rooms, boardrooms, lecture halls, theaters, and museums
  • It features JBL's Digital Directivity Synthesis (DDS) Beam Shaping DSP technology, which allows installers to precisely define listener coverage areas with minimal reflections and maximum direct-to-reverberant ratio for clear, intelligible sound – even in the most challenging acoustic spaces
  • The Intellivox DS115D delivers superb speech intelligibility
  • It provides low-frequency vertical beam control and broad horizontal dispersion, with consistent frequency response and SPL throughout, for uniform audience coverage
  • This Intellivox loudspeaker is typically used to deliver sound coverage over distances up to 15 meters
  • It is primarily designed to provide fill in a larger Intellivox installation but is equally suited for standalone applications
  • For integration flexibility, the Intellivox DS115D includes Dante® and analog audio inputs alongside IP control connectivity
  • A built-in DSP provides processing for DDS beam shaping along with volume control, parametric EQ, user presets, and more
  • Setup, control, status monitoring, and performance optimization are available with the free WinControl and DDA (Digital Directivity Analysis) software tools
  • Intellivox column loudspeaker arrays are ideal for architecturally sensitive environments with a slim, unobtrusive design that requires no mechanical aiming and can be recessed to blend seamlessly into buildings of all ages and styles
  • The finish for the standard enclosure is white, and custom color options are available to fit the loudspeaker's surroundings
  • Features:
  • JBL Digital Directivity Synthesis (DDS) Beam Shaping technology enables unrivaled vertical beam control with unlimited coverage possibilities
  • Superb speech intelligibility
  • Dual-redundant Dante audio connectivity plus analog line inputs
  • Integrated DSP with volume control, delay, eight-band parametric EQ, eight user-definable presets, compression, and automatic gain control
  • Built-in ambient sensing microphone
  • IP connectivity for control and management
  • Built-in redundancy and system monitoring features including automatic input switchover and pilot tone detection
  • Free WinControl software for setup, control, and monitoring
  • Simulation available with JBL DDA (Digital Directivity Analysis), as well as CATT-Acoustic, ODEON, and EASE
Specifications
Size4"
Specifications
Frequency Response (±3 dB)130 Hz - 18 kHz
Coverage Pattern130° horizontal x adjustable vertical (DDS beam shaping)
Maximum SPL (30m, A-weighted)85 dB continuous, 88 dB peak
Dynamic Range>100 dB
Transducers6 x 4" full-range, 2 x 10mm coaxial tweeter
Typical Throw15 m
Analog Input TypeTransformer balanced line level
Analog Input Connectors3-way Phoenix
Maximum Peak Input Level+19 dBV peak (+21.22 dBu)
Input Impedance6.8 kΩ
Digital Input TypeDante, 8x8 audio channels
Digital Input ConnectorsTwo 8p RJ-45 (Primary & Secondary)
Amplifier TypeClass D
Amplifier Continuous Power8 x 40W RMS (4 ohm)
Amplifier Peak Power200 W
DSP Sample Rate48.0 kHz (default)
DSP Bit Depth32-bit floating point
DSP Latency3.7 ms
A/D, D/A Converter24-bit (128x oversampling)
Signal Processing21 sec pre-delay; 2x 10 sec input channel delay; equalizer and compensation filtering; volume; RMS and peak limiters on each output; ambient noise sensing autogain (fail-safe); 8x output filters + delay ring buffers
Network Interface TypeEthernet through Dante
Network Connector8p RJ-45
Fault MonitoringFailure relay SPDT 125 mA / 24V, 2-way Phoenix connector
Fan ControlFor optional external fan (24VDC / 3W max), 2-way Phoenix connector
Mains Voltage Range115V to 230V
AC Connector3p IEC
Max Mains Inrush Current25 A short-time peak (230V)
Current Draw58 VA (idle) / 175 VA (male speech STIPA) / 325 VA (full load)
Enclosure MaterialSteel
ColorEnclosure and grille RAL9010 (white); speaker baffle RAL9011 (black)
Dimensions (H x W x D)1149mm x 134mm x 92mm (45.2 in x 5.3 in x 3.6 in)
Temperature Range0 to 40°C (32-104°F)
Shipping Weight16 kg (35 lb)
Environmental StandardsCE, CSA/UL, CCC; Safety EN 62368-1:2014+A11:2017; EMC EN 55032:2012/AC:2013 class A; EMC EN 55103-2:2009; Mains harmonics EN 61000-3-2:2014
Included AccessoriesWall bracket (25mm), connector set
Optional AccessoriesSwivel bracket 90°, swivel bracket 45°, cover plate, hinge bracket 90°, cover box 58mm, program set universal USB
Order SKU VariantsJBL-DS115D-B (amp-at-bottom), JBL-DS115D-T (amp-at-top)
Additional Specifications
Mount TypeColumn
Mounting Information
Net Weight13 kg / 28 lbs
support_agent

Questions about this speaker? Our pro audio team is here to help.