Control Series
SKU CONTROL 50S/T
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200mm (8 in) driver which features an extremely robust high-mass cone for extended low frequency response, a 38mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 8" |
| Specifications | |
| Frequency Range (-10 dB) | 32 Hz – 200 Hz |
| Frequency Response (±3 dB) | 50 Hz – 150 Hz |
| Power Capacity | 300W Continuous Program Power (2 hrs); 150W Continuous Pink Noise (2 hrs); 200W Continuous Program Power (100 hrs); 100W Continuous Pink Noise (100 hrs) |
| Sensitivity | 95 dB (near corner), 89 dB (center of wall) |
| Maximum SPL (1m) | 115 dB average, 121 dB peak (near corner); 109 dB average, 115 dB peak (center of wall) |
| Impedance | 8 ohms (bypass/thru mode) |
| Transformer Taps | 80W, 40W, 20W (& 10W @ 70V), 8 ohm bypass/thru |
| Drivers | 200mm (8 in) with polypropylene cone, butyl rubber surround, 38mm (1.5 in) 4-layer copper-clad coil, vented aluminum former |
| Input Connectors | Six removable locking 2-pin connectors with screw-down terminals, max wire 12 AWG (2.5 mm2) |
| Enclosure | Top/bottom/front/bottom: structural plywood; port & terminal panels: MDF; grille: painted zinc-plated metal |
| Dimensions (H x W x D) | Cabinet: 356 x 391 x 203mm (14.0 x 15.4 x 8.0 in); wall bracket: 15mm (0.6 in) deep |
| Mounting Hardware | 2.3mm (0.9 in) thick zinc-plated and painted cold-rolled steel |
| Net Weight (each) | 9.0 kg (20 lb) |
| Shipping Weight | 10.2 kg (23 lb) |
| Included Accessories | Wall bracket (speaker and wall parts) with 4 pcs M6 screws, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard |
| Grille | Zinc-plated steel |
| Coverage Angle | Omnidirectional |
| Additional Specifications | |
| Configuration | Subwoofer |
| Mount Type | Surface-Mount |
| Mounting Information | |
| Net Weight | 9.07 kg / 20 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 8" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 32 Hz – 200 Hz | Enclosure | Top/bottom/front/bottom: structural plywood; port & terminal panels: MDF; grille: painted zinc-plated metal |
| Frequency Response (±3 dB) | 50 Hz – 150 Hz | Dimensions (H x W x D) | Cabinet: 356 x 391 x 203mm (14.0 x 15.4 x 8.0 in); wall bracket: 15mm (0.6 in) deep |
| Power Capacity | 300W Continuous Program Power (2 hrs); 150W Continuous Pink Noise (2 hrs); 200W Continuous Program Power (100 hrs); 100W Continuous Pink Noise (100 hrs) | Mounting Hardware | 2.3mm (0.9 in) thick zinc-plated and painted cold-rolled steel |
| Sensitivity | 95 dB (near corner), 89 dB (center of wall) | Net Weight (each) | 9.0 kg (20 lb) |
| Maximum SPL (1m) | 115 dB average, 121 dB peak (near corner); 109 dB average, 115 dB peak (center of wall) | Shipping Weight | 10.2 kg (23 lb) |
| Impedance | 8 ohms (bypass/thru mode) | Included Accessories | Wall bracket (speaker and wall parts) with 4 pcs M6 screws, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard |
| Transformer Taps | 80W, 40W, 20W (& 10W @ 70V), 8 ohm bypass/thru | Grille | Zinc-plated steel |
| Drivers | 200mm (8 in) with polypropylene cone, butyl rubber surround, 38mm (1.5 in) 4-layer copper-clad coil, vented aluminum former | Coverage Angle | Omnidirectional |
| Input Connectors | Six removable locking 2-pin connectors with screw-down terminals, max wire 12 AWG (2.5 mm2) | ||
| Additional Specifications | |||
| Configuration | Subwoofer | Mount Type | Surface-Mount |
| Mounting Information | |||
| Net Weight | 9.07 kg / 20 lbs | ||
Questions about this speaker? Our pro audio team is here to help.