Control Series
SKU CONTROL 31
The Control 31 is a two-way high-output indoor/outdoor monitor speaker built around a 250mm (10 in) woven fiberglass cone LF driver and a high-output 2414H-C compression driver, providing extended bandwidth and extremely smooth frequency response with 110° x 110° symmetrical coverage.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 10" |
| Specifications | |
| Frequency Range (-10 dB) | 33 Hz – 19 kHz |
| Frequency Response (±3 dB) | 42 Hz – 14 kHz |
| Power Ratings | 250W (1000W peak), 2 hrs; 200W (800W peak), 100 hrs |
| Maximum SPL (1m) | 116 dB continuous (123 dB peak) |
| Sensitivity | 92 dB |
| Coverage Angle | 110°H x 110°V |
| Directivity Factor (Q) | 5.7, averaged 500 Hz to 10 kHz |
| Directivity Index (DI) | 7.3 dB, averaged 500 Hz to 10 kHz |
| Impedance | 8 ohms |
| Crossover Type | 2nd order low-pass, 2nd order high-pass, plus conjugate shaping circuitry |
| Transformer Taps | 70V: 150W, 75W, 38W, 19W; 100V: 150W, 75W, 38W; insertion loss <0.65 dB; Thru: 8Ω nominal |
| Recommended High-Pass | Protective 40 Hz high-pass (24 dB/oct) for any transformer tap and 8Ω operation |
| Drivers | LF: 250mm (10 in) woven-fiberglass cone with pure butyl rubber surround, 52mm (2 in) voice coil on high-temperature fiberglass former, aluminum ring on pole piece; HF: JBL 2414H-C compression driver, 25mm (1 in) diaphragm, high temperature polymer diaphragm, fluid-cooled |
| Enclosure | High impact Polystyrene (HIPS) with 10% glass fill plus patent-pending internal 5mm foamed polyurethane secondary mold |
| Grille | Zinc-plated and thermoset-composite coated steel, WeatherMax multi-layer foam with tight-weave mesh vapor barrier |
| Mounting Hardware | InvisiBall wall-mounting system included; ten 6mm attachment points on cabinet for suspending or optional U-bracket; one 6mm secondary safety attachment point on back panel |
| Outdoor Capability | IP-55 per IEC529; exceeds Mil Spec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F; optional MTC-30MK marine-kit grille |
| Input Connectors | Screw-down terminal strip, accepts up to 9mm outside/4mm inside open lugs (#6, #8, #10) plus bare wire up to 12 AWG |
| Safety Agency | Transformer listed per UL1876 |
| Colors | Black (RAL9004) or white (-WH, RAL9003) |
| Dimensions (H x W x D) | 593 x 372 x 345mm (23.3 x 14.6 x 13.5 in) |
| Net Weight (each) | 18.8 kg (41.5 lb) |
| Shipping Weight | 22.0 kg (48.5 lb) |
| Included Accessories | 1 pc MTC-PC2 input panel cover, InvisiBall wall-mounting system, 6mm x 305mm InvisiBall hex wrench |
| Optional Accessories | MTC-30MK Marine-Kit Grille (black or white); MTC-30CM (&-WH) Ceiling-Mount Adapter; MTC-30UB (&-WH) U-Bracket |
| Additional Specifications | |
| Configuration | 2-Way |
| Mounting Information | |
| Net Weight | 18.82 kg / 41.5 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 10" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 33 Hz – 19 kHz | Enclosure | High impact Polystyrene (HIPS) with 10% glass fill plus patent-pending internal 5mm foamed polyurethane secondary mold |
| Frequency Response (±3 dB) | 42 Hz – 14 kHz | Grille | Zinc-plated and thermoset-composite coated steel, WeatherMax multi-layer foam with tight-weave mesh vapor barrier |
| Power Ratings | 250W (1000W peak), 2 hrs; 200W (800W peak), 100 hrs | Mounting Hardware | InvisiBall wall-mounting system included; ten 6mm attachment points on cabinet for suspending or optional U-bracket; one 6mm secondary safety attachment point on back panel |
| Maximum SPL (1m) | 116 dB continuous (123 dB peak) | Outdoor Capability | IP-55 per IEC529; exceeds Mil Spec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F; optional MTC-30MK marine-kit grille |
| Sensitivity | 92 dB | Input Connectors | Screw-down terminal strip, accepts up to 9mm outside/4mm inside open lugs (#6, #8, #10) plus bare wire up to 12 AWG |
| Coverage Angle | 110°H x 110°V | Safety Agency | Transformer listed per UL1876 |
| Directivity Factor (Q) | 5.7, averaged 500 Hz to 10 kHz | Colors | Black (RAL9004) or white (-WH, RAL9003) |
| Directivity Index (DI) | 7.3 dB, averaged 500 Hz to 10 kHz | Dimensions (H x W x D) | 593 x 372 x 345mm (23.3 x 14.6 x 13.5 in) |
| Impedance | 8 ohms | Net Weight (each) | 18.8 kg (41.5 lb) |
| Crossover Type | 2nd order low-pass, 2nd order high-pass, plus conjugate shaping circuitry | Shipping Weight | 22.0 kg (48.5 lb) |
| Transformer Taps | 70V: 150W, 75W, 38W, 19W; 100V: 150W, 75W, 38W; insertion loss <0.65 dB; Thru: 8Ω nominal | Included Accessories | 1 pc MTC-PC2 input panel cover, InvisiBall wall-mounting system, 6mm x 305mm InvisiBall hex wrench |
| Recommended High-Pass | Protective 40 Hz high-pass (24 dB/oct) for any transformer tap and 8Ω operation | Optional Accessories | MTC-30MK Marine-Kit Grille (black or white); MTC-30CM (&-WH) Ceiling-Mount Adapter; MTC-30UB (&-WH) U-Bracket |
| Drivers | LF: 250mm (10 in) woven-fiberglass cone with pure butyl rubber surround, 52mm (2 in) voice coil on high-temperature fiberglass former, aluminum ring on pole piece; HF: JBL 2414H-C compression driver, 25mm (1 in) diaphragm, high temperature polymer diaphragm, fluid-cooled | ||
| Additional Specifications | |||
| Configuration | 2-Way | ||
| Mounting Information | |||
| Net Weight | 18.82 kg / 41.5 lbs | ||
Questions about this speaker? Our pro audio team is here to help.