Control Series
SKU C29AV-1
The Control 29AV-1 is a premium indoor/outdoor monitor speaker built around a 200mm (8 in) Kevlar cone woofer and a 25mm (1 in) titanium diaphragm compression driver, delivering extended bandwidth and extremely smooth frequency response with a rotatable 110° x 85° high-frequency horn.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 8" |
| Specifications | |
| Frequency Range (-10 dB) | 37 Hz – 18 kHz |
| Power Capacity | 300W Continuous Program Power; 150W Continuous Pink Noise |
| Transformer Taps | 70V: 110W, 55W, 28W, 14W; 100V: 110W, 55W, 28W; Thru: 8 ohms nominal |
| Frequency Response (±3 dB) | 45 Hz – 18 kHz |
| Maximum SPL (1m) | Short-Term: 120 dB; Long-Term: 114 dB |
| Nominal Sensitivity | 90 dB (2.83V/1m) |
| Coverage Angle | 110°H x 85°V, rotatable |
| Directivity Factor (Q) | 7.2 dB, averaged 500 Hz to 16 kHz |
| Directivity Index (DI) | 8.6 dB, averaged 500 Hz to 16 kHz |
| Impedance | 8 ohms |
| Minimum Impedance | 6.3 ohms @ 230 Hz |
| Crossover Network | 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover |
| Drivers | LF: 200mm (8 in) kevlar cone with pure butyl rubber surround, 50mm (2 in) voice coil on fiberglass former; HF: 25mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround |
| Enclosure | High impact polystyrene |
| Grille | Thermoset composite coated steel, WeatherMax multi-layer foam |
| Overload Protection | Full-range power limiting to protect network and transducers; serviceable internal fuse |
| Outdoor Capability | IEC 529 IP-X4 rating; exceeds Mil Spec 810 for humidity, salt spray, temperature & UV; passes Mil-Std-202F |
| Input Connectors | Screw-down terminal strip, accepts up to 9mm outside/4mm inside open lug (#6, #8, #10) plus bare wire up to 12 AWG |
| Safety Agency | Transformer listed per UL1876 |
| Colors | Black or white (-WH) |
| Dimensions (H x W x D) | 520 x 306 x 277mm (20.5 x 12.0 x 10.9 in) |
| Net Weight (each) | 12.2 kg (26.8 lb) |
| Shipping Weight | 14.0 kg (30.8 lb) |
| Included Accessories | 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6mm x 260mm InvisiBall hex wrench |
| Optional Accessories | MTC-29CM ceiling-mount adapter, MTC-29UB U-bracket |
| Mounting Information | |
| Net Weight | 12.16 kg / 26.8 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 8" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 37 Hz – 18 kHz | Enclosure | High impact polystyrene |
| Power Capacity | 300W Continuous Program Power; 150W Continuous Pink Noise | Grille | Thermoset composite coated steel, WeatherMax multi-layer foam |
| Transformer Taps | 70V: 110W, 55W, 28W, 14W; 100V: 110W, 55W, 28W; Thru: 8 ohms nominal | Overload Protection | Full-range power limiting to protect network and transducers; serviceable internal fuse |
| Frequency Response (±3 dB) | 45 Hz – 18 kHz | Outdoor Capability | IEC 529 IP-X4 rating; exceeds Mil Spec 810 for humidity, salt spray, temperature & UV; passes Mil-Std-202F |
| Maximum SPL (1m) | Short-Term: 120 dB; Long-Term: 114 dB | Input Connectors | Screw-down terminal strip, accepts up to 9mm outside/4mm inside open lug (#6, #8, #10) plus bare wire up to 12 AWG |
| Nominal Sensitivity | 90 dB (2.83V/1m) | Safety Agency | Transformer listed per UL1876 |
| Coverage Angle | 110°H x 85°V, rotatable | Colors | Black or white (-WH) |
| Directivity Factor (Q) | 7.2 dB, averaged 500 Hz to 16 kHz | Dimensions (H x W x D) | 520 x 306 x 277mm (20.5 x 12.0 x 10.9 in) |
| Directivity Index (DI) | 8.6 dB, averaged 500 Hz to 16 kHz | Net Weight (each) | 12.2 kg (26.8 lb) |
| Impedance | 8 ohms | Shipping Weight | 14.0 kg (30.8 lb) |
| Minimum Impedance | 6.3 ohms @ 230 Hz | Included Accessories | 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6mm x 260mm InvisiBall hex wrench |
| Crossover Network | 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover | Optional Accessories | MTC-29CM ceiling-mount adapter, MTC-29UB U-bracket |
| Drivers | LF: 200mm (8 in) kevlar cone with pure butyl rubber surround, 50mm (2 in) voice coil on fiberglass former; HF: 25mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround | ||
| Mounting Information | |||
| Net Weight | 12.16 kg / 26.8 lbs | ||
Questions about this speaker? Our pro audio team is here to help.