CBT/COL Series
SKU JBL-COL800-BK
The COL800 is an elegant column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall.
| Overview | |
|---|---|
| |
| Specifications | |
| Frequency Range (-10 dB) | 85 Hz - 20 kHz |
| Frequency Response (±3 dB) | 125 Hz - 18 kHz |
| Power Rating | 300W Continuous Program (2hrs); 150W (600W peak) Continuous Pink Noise (2hrs); 100W (400W peak) Continuous Pink Noise (100hrs) |
| Sensitivity (2.83V @ 1m) | 88 dB |
| Coverage Pattern | Vertical 60° (1-4kHz avg), 10° down-tilt to vertical aiming axis; Horizontal 160° (1-4kHz avg) |
| Directivity Factor (Q) | 8.1 |
| Directivity Index (DI) | 9.1 dB |
| Rated Maximum SPL | 110 dB continuous (116 dB peak) @ 1m |
| Nominal Impedance | 8Ω (in Thru/direct mode) |
| Minimum Impedance | 7.7Ω @ 290 Hz |
| Transformer Taps | 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8Ω thru, selectable via switch |
| Transformer Insertion Loss | Less than 1 dB for all taps |
| Maximum Input Voltage | 33V RMS (2hrs), 66V peak |
| Recommended Protective High-Pass | 75 Hz for 8Ω operation; 60 Hz for all transformer tap settings |
| Drivers | Four 125x55mm (5x2.25in) racetrack LF drivers; two 20mm (0.8in) tweeters (located at top of array) |
| Enclosure Material | PC + ABS, UL94-V0 flammability rating |
| Grille | Plated SPCC with polyester powder coat finish |
| Environmental | IP-54 rated per IEC60529, dust and water protected when installed with included cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant |
| Agency Ratings | Transformer UL Recognized per UL1446. Compliant with IEC62368-1, RoHS |
| Terminals | 4-pin Euroblock connection for bare wire, accepts 20 to 14 AWG (0.5 to 2.5 sq mm) |
| Insert Points | Back panel: 2 for wall bracket + 1 for secondary safety cable (M6); top & bottom caps: 1 each for L-bracket (M6); side panels: 1 each for L-bracket (M6) |
| Mounting | Included swivel (pan)/tilt wall bracket: ±95° horizontal swivel, +0°/-10° vertical tilt; or two included L-brackets (top/bottom or side/side); or installer-supplied via the same threaded insert points |
| Dimensions (H x W x D) | 800mm x 102mm x 93mm (31.5 in x 4.1 in x 3.7 in) |
| Shipping Weight | 6.4 kg (14.0 lb) each (1 speaker per carton) |
| Included Accessories | Low-profile swivel (pan)/tilt wall bracket; trim cover for wall bracket; 2x L-brackets |
| SKU Numbers and Colors | JBL-COL800-BK (black, RAL9004), JBL-COL800-WH (white, RAL9016) |
| Additional Specifications | |
| Mount Type | Column |
| Mounting Information | |
| Net Weight | 5.2 kg / 11.5 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Frequency Range (-10 dB) | 85 Hz - 20 kHz | Recommended Protective High-Pass | 75 Hz for 8Ω operation; 60 Hz for all transformer tap settings |
| Frequency Response (±3 dB) | 125 Hz - 18 kHz | Drivers | Four 125x55mm (5x2.25in) racetrack LF drivers; two 20mm (0.8in) tweeters (located at top of array) |
| Power Rating | 300W Continuous Program (2hrs); 150W (600W peak) Continuous Pink Noise (2hrs); 100W (400W peak) Continuous Pink Noise (100hrs) | Enclosure Material | PC + ABS, UL94-V0 flammability rating |
| Sensitivity (2.83V @ 1m) | 88 dB | Grille | Plated SPCC with polyester powder coat finish |
| Coverage Pattern | Vertical 60° (1-4kHz avg), 10° down-tilt to vertical aiming axis; Horizontal 160° (1-4kHz avg) | Environmental | IP-54 rated per IEC60529, dust and water protected when installed with included cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant |
| Directivity Factor (Q) | 8.1 | Agency Ratings | Transformer UL Recognized per UL1446. Compliant with IEC62368-1, RoHS |
| Directivity Index (DI) | 9.1 dB | Terminals | 4-pin Euroblock connection for bare wire, accepts 20 to 14 AWG (0.5 to 2.5 sq mm) |
| Rated Maximum SPL | 110 dB continuous (116 dB peak) @ 1m | Insert Points | Back panel: 2 for wall bracket + 1 for secondary safety cable (M6); top & bottom caps: 1 each for L-bracket (M6); side panels: 1 each for L-bracket (M6) |
| Nominal Impedance | 8Ω (in Thru/direct mode) | Mounting | Included swivel (pan)/tilt wall bracket: ±95° horizontal swivel, +0°/-10° vertical tilt; or two included L-brackets (top/bottom or side/side); or installer-supplied via the same threaded insert points |
| Minimum Impedance | 7.7Ω @ 290 Hz | Dimensions (H x W x D) | 800mm x 102mm x 93mm (31.5 in x 4.1 in x 3.7 in) |
| Transformer Taps | 60W, 30W, 15W @ both 70V & 100V (plus 7.5W @ 70V), and 8Ω thru, selectable via switch | Shipping Weight | 6.4 kg (14.0 lb) each (1 speaker per carton) |
| Transformer Insertion Loss | Less than 1 dB for all taps | Included Accessories | Low-profile swivel (pan)/tilt wall bracket; trim cover for wall bracket; 2x L-brackets |
| Maximum Input Voltage | 33V RMS (2hrs), 66V peak | SKU Numbers and Colors | JBL-COL800-BK (black, RAL9004), JBL-COL800-WH (white, RAL9016) |
| Additional Specifications | |||
| Mount Type | Column | ||
| Mounting Information | |||
| Net Weight | 5.2 kg / 11.5 lbs | ||
Questions about this speaker? Our pro audio team is here to help.