CBT/COL Series
SKU CBT 200LA-1
The CBT 200LA-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency and coverage options, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent coverage without the inconsistent vertical beaming and out-of-coverage lobing typical of column speakers.
| Overview | |
|---|---|
| |
| Specifications | |
| Components | Thirty-two 50mm (2 in) Full-Range Drivers |
| Frequency Range (-10 dB) | 80 Hz - 20 kHz |
| Frequency Response (±3 dB) | 130 Hz - 18 kHz (narrow coverage, music mode) |
| Vertical Coverage — Narrow Mode | 15° (500Hz-16kHz, +15°/-2°) |
| Vertical Coverage — Broad Mode | 30° (400Hz-12kHz, +15°/-8°) |
| Vertical Coverage — Asymmetrical Progressive-Gradient | 22° (top Narrow / bottom Broad, "J-type" coverage, +7°/-15° from aiming axis, 300Hz-12kHz) |
| Horizontal Coverage | 150° (ave, 1-4kHz, ±20°) |
| Sensitivity — Narrow | Speech: 95 dB (2-5kHz); Music: 92 dB (150Hz-18kHz) |
| Sensitivity — Broad | Speech: 93 dB (2-5kHz); Music: 90 dB (150Hz-18kHz) |
| Sensitivity — Asymmetrical Progressive-Gradient (on-axis) | Speech: 94 dB (2-5kHz); Music: 91 dB (150Hz-18kHz) |
| Nominal Impedance | 8Ω per half (top and bottom), 4 ohms total in thru mode; Min-Z for system: 2.9Ω |
| Power Capacity (thru setting) | 650W (2600W peak), 2 hrs; 400W (1600W peak), 100 hrs |
| Max SPL — Narrow | Speech: 123 dB cont ave (129 peak); Music: 120 dB cont ave (126 peak) |
| Max SPL — Broad | Speech: 121 dB cont ave (127 peak); Music: 118 dB cont ave (124 peak) |
| Max SPL — Asymmetrical Progressive-Gradient (on-axis) | Speech: 122 dB cont ave (128 peak); Music: 119 dB cont ave (125 peak) |
| 70V/100V Transformer Taps (per module) | 120W, 60W, 30W (15W at 70V only), and direct 8Ω, via switch. Total (both modules): 240W, 120W, 60W (30W at 70V only), direct 4Ω |
| Enclosure | Fiberglass reinforced ABS cabinet, painted aluminum grille |
| Connectors | Two (one per half), screw-down terminal strip; accepts up to 9mm outside/4mm inside open lug or bare wire up to 12 AWG (2.5mm²) |
| Outdoor Capability | IP-55 rated per IEC529 with optional MTC-PC2 panel cover; UV, moisture, and 200-hr salt-spray resistant |
| Colors | Black or White (-WH) |
| Configuration | Two pieces (top and bottom half), each 100cm tall, connected via Coupler Plate |
| Insert Points | 28 M6 insert points on back panel (36 total, 8 center points used by Coupler Plate) |
| Mounting | Included swivel (pan)/tilt wall bracket (mounted to Coupler Plate): ±80° left-right swivel (at up to ±5° tilt), ±10° continuously adjustable tilt, 5° fixed increments; 28 threaded points, compatible with OmniMount 30.0 |
| Dimensions, Fully Assembled (H x W x D) | 2000mm x 98.5mm x 153mm (78.8 in x 3.8 in x 6.0 in) |
| Net Weight (2-module system) | approx. 29.2 kg (66 lb) |
| Included Accessories | Swivel (pan)/tilt wall bracket, Coupler Plate |
| Optional Accessories | MTC-PC2 terminal panel cover; MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 required); MTC-CBT-SMB1 stand-mount bracket for 35mm speaker stands |
| Additional Specifications | |
| Mount Type | Column |
| Mounting Information | |
| Net Weight | 14.97 kg / 33 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Components | Thirty-two 50mm (2 in) Full-Range Drivers | Max SPL — Asymmetrical Progressive-Gradient (on-axis) | Speech: 122 dB cont ave (128 peak); Music: 119 dB cont ave (125 peak) |
| Frequency Range (-10 dB) | 80 Hz - 20 kHz | 70V/100V Transformer Taps (per module) | 120W, 60W, 30W (15W at 70V only), and direct 8Ω, via switch. Total (both modules): 240W, 120W, 60W (30W at 70V only), direct 4Ω |
| Frequency Response (±3 dB) | 130 Hz - 18 kHz (narrow coverage, music mode) | Enclosure | Fiberglass reinforced ABS cabinet, painted aluminum grille |
| Vertical Coverage — Narrow Mode | 15° (500Hz-16kHz, +15°/-2°) | Connectors | Two (one per half), screw-down terminal strip; accepts up to 9mm outside/4mm inside open lug or bare wire up to 12 AWG (2.5mm²) |
| Vertical Coverage — Broad Mode | 30° (400Hz-12kHz, +15°/-8°) | Outdoor Capability | IP-55 rated per IEC529 with optional MTC-PC2 panel cover; UV, moisture, and 200-hr salt-spray resistant |
| Vertical Coverage — Asymmetrical Progressive-Gradient | 22° (top Narrow / bottom Broad, "J-type" coverage, +7°/-15° from aiming axis, 300Hz-12kHz) | Colors | Black or White (-WH) |
| Horizontal Coverage | 150° (ave, 1-4kHz, ±20°) | Configuration | Two pieces (top and bottom half), each 100cm tall, connected via Coupler Plate |
| Sensitivity — Narrow | Speech: 95 dB (2-5kHz); Music: 92 dB (150Hz-18kHz) | Insert Points | 28 M6 insert points on back panel (36 total, 8 center points used by Coupler Plate) |
| Sensitivity — Broad | Speech: 93 dB (2-5kHz); Music: 90 dB (150Hz-18kHz) | Mounting | Included swivel (pan)/tilt wall bracket (mounted to Coupler Plate): ±80° left-right swivel (at up to ±5° tilt), ±10° continuously adjustable tilt, 5° fixed increments; 28 threaded points, compatible with OmniMount 30.0 |
| Sensitivity — Asymmetrical Progressive-Gradient (on-axis) | Speech: 94 dB (2-5kHz); Music: 91 dB (150Hz-18kHz) | Dimensions, Fully Assembled (H x W x D) | 2000mm x 98.5mm x 153mm (78.8 in x 3.8 in x 6.0 in) |
| Nominal Impedance | 8Ω per half (top and bottom), 4 ohms total in thru mode; Min-Z for system: 2.9Ω | Net Weight (2-module system) | approx. 29.2 kg (66 lb) |
| Power Capacity (thru setting) | 650W (2600W peak), 2 hrs; 400W (1600W peak), 100 hrs | Included Accessories | Swivel (pan)/tilt wall bracket, Coupler Plate |
| Max SPL — Narrow | Speech: 123 dB cont ave (129 peak); Music: 120 dB cont ave (126 peak) | Optional Accessories | MTC-PC2 terminal panel cover; MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 required); MTC-CBT-SMB1 stand-mount bracket for 35mm speaker stands |
| Max SPL — Broad | Speech: 121 dB cont ave (127 peak); Music: 118 dB cont ave (124 peak) | ||
| Additional Specifications | |||
| Mount Type | Column | ||
| Mounting Information | |||
| Net Weight | 14.97 kg / 33 lbs | ||
Questions about this speaker? Our pro audio team is here to help.