CBT/COL Series
SKU CBT 1000
The CBT 1000 represents the next-generation in pattern control, expanding upon JBL's Constant Beamwidth Technology™.
| Overview | |
|---|---|
| |
| Specifications | |
| Components | Six 165mm (6.5 in) LF drivers; twenty-four 25mm (1 in) HF drivers |
| Frequency Range (-10 dB) | 45 Hz - 20 kHz |
| Sensitivity (2.83V @ 1m) | 102 dB (highest setting: Point/Point, Speech, free space); 95 dB (lowest setting: Medium/Downfill, Music, free space) |
| Nominal Impedance | 4 ohms (4 ohms above 1kHz; 8 ohms below 800Hz) |
| Power Capacity | 1500W (6000W peak), 2 hrs; 900W (3600W peak), 100 hrs |
| Maximum Input Voltage | 65.0V RMS (2hrs), 130.0V peak |
| Max SPL — Highest Directivity, Speech | 131 dB cont ave, 134 dB cont program, 137 dB peak |
| Max SPL — Highest Directivity, Music | 127 dB cont ave, 130 dB cont program, 133 dB peak |
| Max SPL — Lowest Directivity, Speech | 128 dB cont ave, 131 dB cont program, 134 dB peak |
| Max SPL — Lowest Directivity, Music | 124 dB cont ave, 127 dB cont program, 130 dB peak |
| Pattern UP Settings (-6dB / -12dB @ 3kHz) | Point: +7°/+12°; Tight: +9°/+15°; Narrow: +10°/+20°; Medium: +13°/+24° |
| Pattern DOWN Settings (-6dB / -12dB @ 3kHz) | Point: -7°/-12°; Narrow: -10°/-20°; Broad: -17°/-28°; Downfill: -20°/-35° |
| Horizontal Coverage | Tapered Horizontal Waveguide, continuously variable: long-throw (top) 100°; middle 130°; short-throw (bottom) 160° |
| Recommended High-Pass | 35Hz, 24 dB/oct or greater |
| Low Frequency Drivers | 6x 165mm (6.5 in), lightweight neodymium motors, 50mm (2.0 in) voice coils, copper-capped pole tips, 16mm (0.63 in) long coil, damped blended textile surround, coated cones, magnetically shielded |
| High Frequency Drivers | 24x 25mm (1 in), neodymium, encased magnet and coated diaphragm for moisture/UV/salt resistance |
| Enclosure | Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille |
| Outdoor Capability | IP-55 rated per IEC529 with optional MTC-PC2 cover; exceeds Mil Spec 810 for humidity/temperature/UV; ASTM G85 acid-air/salt-spray (200 hrs) |
| Colors | Black (RAL9004) or White (-WH) (RAL9016) |
| Insert Points | 14 individual M8 inserts on back panel (20mm deep), plus 4 each on top and bottom end-caps |
| Mounting | Included two-part swivel (pan)/tilt wall bracket: ±45° left-right swivel (at no tilt), ±15° tilt in 1° increments; 14 threaded points conform to 127x70mm (5.0x2.75in) legacy OmniMount pattern, plus 4 each on top/bottom end-caps; can be used for suspension |
| Dimensions (H x W x D) | 1020mm x 250mm x 345mm (40.2 in x 9.9 in x 13.6 in) |
| Net Weight (cabinet) | 24.5 kg (54 lb) |
| Shipping Weight | 38.6 kg (85 lb) |
| Included Accessories | Two-piece swivel (pan)/tilt wall bracket |
| Optional Accessories | MTC-PC2 terminal panel cover; MTC-CBT1K-ACC1 kit (2x MTC-CBT-FM3 flush-mount brackets + 1x MTC-CBT-OS3 offset bracket); MTC-CBT-SUS3 suspension bracket kit |
| Additional Specifications | |
| Configuration | 2-Way |
| Mount Type | Column |
| Mounting Information | |
| Net Weight | 24.49 kg / 54 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Components | Six 165mm (6.5 in) LF drivers; twenty-four 25mm (1 in) HF drivers | Recommended High-Pass | 35Hz, 24 dB/oct or greater |
| Frequency Range (-10 dB) | 45 Hz - 20 kHz | Low Frequency Drivers | 6x 165mm (6.5 in), lightweight neodymium motors, 50mm (2.0 in) voice coils, copper-capped pole tips, 16mm (0.63 in) long coil, damped blended textile surround, coated cones, magnetically shielded |
| Sensitivity (2.83V @ 1m) | 102 dB (highest setting: Point/Point, Speech, free space); 95 dB (lowest setting: Medium/Downfill, Music, free space) | High Frequency Drivers | 24x 25mm (1 in), neodymium, encased magnet and coated diaphragm for moisture/UV/salt resistance |
| Nominal Impedance | 4 ohms (4 ohms above 1kHz; 8 ohms below 800Hz) | Enclosure | Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille |
| Power Capacity | 1500W (6000W peak), 2 hrs; 900W (3600W peak), 100 hrs | Outdoor Capability | IP-55 rated per IEC529 with optional MTC-PC2 cover; exceeds Mil Spec 810 for humidity/temperature/UV; ASTM G85 acid-air/salt-spray (200 hrs) |
| Maximum Input Voltage | 65.0V RMS (2hrs), 130.0V peak | Colors | Black (RAL9004) or White (-WH) (RAL9016) |
| Max SPL — Highest Directivity, Speech | 131 dB cont ave, 134 dB cont program, 137 dB peak | Insert Points | 14 individual M8 inserts on back panel (20mm deep), plus 4 each on top and bottom end-caps |
| Max SPL — Highest Directivity, Music | 127 dB cont ave, 130 dB cont program, 133 dB peak | Mounting | Included two-part swivel (pan)/tilt wall bracket: ±45° left-right swivel (at no tilt), ±15° tilt in 1° increments; 14 threaded points conform to 127x70mm (5.0x2.75in) legacy OmniMount pattern, plus 4 each on top/bottom end-caps; can be used for suspension |
| Max SPL — Lowest Directivity, Speech | 128 dB cont ave, 131 dB cont program, 134 dB peak | Dimensions (H x W x D) | 1020mm x 250mm x 345mm (40.2 in x 9.9 in x 13.6 in) |
| Max SPL — Lowest Directivity, Music | 124 dB cont ave, 127 dB cont program, 130 dB peak | Net Weight (cabinet) | 24.5 kg (54 lb) |
| Pattern UP Settings (-6dB / -12dB @ 3kHz) | Point: +7°/+12°; Tight: +9°/+15°; Narrow: +10°/+20°; Medium: +13°/+24° | Shipping Weight | 38.6 kg (85 lb) |
| Pattern DOWN Settings (-6dB / -12dB @ 3kHz) | Point: -7°/-12°; Narrow: -10°/-20°; Broad: -17°/-28°; Downfill: -20°/-35° | Included Accessories | Two-piece swivel (pan)/tilt wall bracket |
| Horizontal Coverage | Tapered Horizontal Waveguide, continuously variable: long-throw (top) 100°; middle 130°; short-throw (bottom) 160° | Optional Accessories | MTC-PC2 terminal panel cover; MTC-CBT1K-ACC1 kit (2x MTC-CBT-FM3 flush-mount brackets + 1x MTC-CBT-OS3 offset bracket); MTC-CBT-SUS3 suspension bracket kit |
| Additional Specifications | |||
| Configuration | 2-Way | Mount Type | Column |
| Mounting Information | |||
| Net Weight | 24.49 kg / 54 lbs | ||
Questions about this speaker? Our pro audio team is here to help.