AE Series
SKU AW266
The AW266 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300mm (12 in) low-frequency driver and 2432H high-frequency 38mm (1.5 in) exit, 75mm (3 in) voice-coil compression driver.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 12" |
| Specifications | |
| Frequency Range (-10 dB) | 40 Hz – 20 kHz |
| Frequency Response (±3 dB) | 51 Hz – 18 kHz |
| Coverage Pattern | 60° x 60° waveguide |
| Directivity Factor (Q) | 15.8 |
| Directivity Index (DI) | 12 dB |
| Crossover Frequency | 1.1 kHz |
| System Power Rating | 500W (2000W peak), 100 hrs |
| Maximum SPL (1m) | 126 dB SPL (132 dB peak) |
| System Sensitivity (1W @ 1m) | 98 dB |
| Transformer Taps | 70V: 400W, 200W, 100W; 100V: 400W, 200W |
| LF Driver | 1 x JBL 2262H 300mm (12 in) Differential Drive driver with 75mm (3 in) dual voice coil |
| Nominal LF Driver Impedance | 8 ohms |
| LFD Sensitivity (1W @ 1m, within operational band) | 96 dB SPL |
| HF Driver | JBL 2432H, 38mm (1.5 in) exit compression driver, 75mm (3 in) voice coil |
| Nominal HF Driver Impedance | 8 ohms |
| HFD Sensitivity (1W @ 1m) | 113 dB SPL |
| Waveguide | PT-H66HF-1 |
| Enclosure | Hand-Laminated Fiberglass, gray gelcoat (black available) |
| Suspension Attachment | 2x M10 for included U-Bracket, 2x M6 for aiming stabilization, 1x M10 on rear for safety |
| Grille | Three-layer grille assembly: 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh |
| Input Connector | CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs |
| Environmental | IP55C per IEC529 |
| Dimensions (H x W x D, horizontal orientation) | 409 x 732 x 452mm (16.1 x 28.8 x 17.8 in) |
| Net Weight (each) | 25.2 kg (55.5 lb) |
| Additional Specifications | |
| Configuration | 2-Way |
| Mounting Information | |
| Net Weight | 25.17 kg / 55.5 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 12" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 40 Hz – 20 kHz | LFD Sensitivity (1W @ 1m, within operational band) | 96 dB SPL |
| Frequency Response (±3 dB) | 51 Hz – 18 kHz | HF Driver | JBL 2432H, 38mm (1.5 in) exit compression driver, 75mm (3 in) voice coil |
| Coverage Pattern | 60° x 60° waveguide | Nominal HF Driver Impedance | 8 ohms |
| Directivity Factor (Q) | 15.8 | HFD Sensitivity (1W @ 1m) | 113 dB SPL |
| Directivity Index (DI) | 12 dB | Waveguide | PT-H66HF-1 |
| Crossover Frequency | 1.1 kHz | Enclosure | Hand-Laminated Fiberglass, gray gelcoat (black available) |
| System Power Rating | 500W (2000W peak), 100 hrs | Suspension Attachment | 2x M10 for included U-Bracket, 2x M6 for aiming stabilization, 1x M10 on rear for safety |
| Maximum SPL (1m) | 126 dB SPL (132 dB peak) | Grille | Three-layer grille assembly: 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh |
| System Sensitivity (1W @ 1m) | 98 dB | Input Connector | CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs |
| Transformer Taps | 70V: 400W, 200W, 100W; 100V: 400W, 200W | Environmental | IP55C per IEC529 |
| LF Driver | 1 x JBL 2262H 300mm (12 in) Differential Drive driver with 75mm (3 in) dual voice coil | Dimensions (H x W x D, horizontal orientation) | 409 x 732 x 452mm (16.1 x 28.8 x 17.8 in) |
| Nominal LF Driver Impedance | 8 ohms | Net Weight (each) | 25.2 kg (55.5 lb) |
| Additional Specifications | |||
| Configuration | 2-Way | ||
| Mounting Information | |||
| Net Weight | 25.17 kg / 55.5 lbs | ||
Questions about this speaker? Our pro audio team is here to help.