AE Series
SKU ASB6125
The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive dual voice coil dual gap 15 in woofers.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 15" |
| Specifications | |
| Frequency Range (-10 dB) | 32 Hz - 1 kHz |
| Frequency Response (±3 dB) | 38 Hz - 1 kHz |
| Transducer Power Rating (AES) | 1600W (6400W peak), 2 hrs |
| Input Modes | Drivers Parallel / Drivers Discrete |
| System Power Rating | 1350W (5400W peak), 100 hrs |
| Maximum SPL (1m) | 35 Hz-400 Hz: 132 dB SPL cont avg (138 dB peak) |
| System Sensitivity | 35 Hz-400 Hz: 100 dB SPL, 1W (2.0V) @ 1m |
| Nominal Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete-drive mode |
| LF Driver | 2 x 2265H-1, 380mm (15 in) dia., 75mm (3 in) Dual Coil Dual Gap neodymium Differential Drive drivers |
| Enclosure | Rectangular cabinet, 16mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment | 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware |
| Finish | Black DuraFlex finish; white available upon request |
| Grille | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop-through |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Dimensions (H x W x D, vertical orientation) | 965 x 419 x 597mm (38.0 x 16.5 x 23.5 in) |
| Net Weight (each) | 36.7 kg (81.0 lb) |
| Optional Accessories | M10 x 35mm forged shoulder eyebolts with washers |
| Nominal LF Driver Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete-drive mode |
| Additional Specifications | |
| Configuration | Subwoofer |
| Mounting Information | |
| Net Weight | 36.74 kg / 81 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 15" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 32 Hz - 1 kHz | Suspension Attachment | 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware |
| Frequency Response (±3 dB) | 38 Hz - 1 kHz | Finish | Black DuraFlex finish; white available upon request |
| Transducer Power Rating (AES) | 1600W (6400W peak), 2 hrs | Grille | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Modes | Drivers Parallel / Drivers Discrete | Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop-through |
| System Power Rating | 1350W (5400W peak), 100 hrs | Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Maximum SPL (1m) | 35 Hz-400 Hz: 132 dB SPL cont avg (138 dB peak) | Dimensions (H x W x D, vertical orientation) | 965 x 419 x 597mm (38.0 x 16.5 x 23.5 in) |
| System Sensitivity | 35 Hz-400 Hz: 100 dB SPL, 1W (2.0V) @ 1m | Net Weight (each) | 36.7 kg (81.0 lb) |
| Nominal Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete-drive mode | Optional Accessories | M10 x 35mm forged shoulder eyebolts with washers |
| LF Driver | 2 x 2265H-1, 380mm (15 in) dia., 75mm (3 in) Dual Coil Dual Gap neodymium Differential Drive drivers | Nominal LF Driver Impedance | 4 ohms in parallel-drive mode, 2 x 8 ohms in discrete-drive mode |
| Enclosure | Rectangular cabinet, 16mm (5/8 in) exterior grade 11-ply birch plywood | ||
| Additional Specifications | |||
| Configuration | Subwoofer | ||
| Mounting Information | |||
| Net Weight | 36.74 kg / 81 lbs | ||
Questions about this speaker? Our pro audio team is here to help.