AE Series
SKU AM7315/95
AM7315 speakers are high power 3-way full-range loudspeaker systems comprised of one 380mm (15 in) Differential Drive low frequency driver, one 200mm (8 in) CMCD Cone Midrange Compression Driver, and one 38mm (1.5 in) exit/75mm (3 in) voice-coil HF compression driver.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 15" |
| Specifications | |
| Frequency Range (-10 dB) | 38 Hz – 20 kHz |
| Frequency Response (±3 dB) | 45 Hz – 18 kHz |
| Coverage Pattern | /64: 60° x 40°, rotatable waveguide; /95: 90° x 50°, rotatable waveguide |
| Directivity Index (DI) | 13 dB |
| Crossover Modes | Tri-amp/Bi-amp switchable |
| Crossover Frequencies | 300 Hz and 2.3 kHz |
| Transducer Power Rating (AES) | LF: 1000W (4000W peak), 2 hrs, 750W (3000W peak), 100 hrs; MF: 350W (1400W peak), 2 hrs; HF: 100W (400W peak), 2 hrs |
| System Power Rating | LF: 600W (2400W peak), 100 hrs; MF/HF: 200W (800W peak), 100 hrs |
| Maximum SPL (1m) | LF: 127 dB SPL cont avg (133 dB peak); Tri-amp mode: MF 133 dB SPL cont avg (139 dB peak), HF 135 dB SPL cont avg (141 dB peak); Bi-amp mode: MF/HF 133 dB SPL cont avg (139 dB peak) |
| System Sensitivity of Passive Sections (1W @ 1m) | MF/HF Section in Bi-amp mode: 108 dB SPL |
| Nominal Impedance | 8 ohms |
| LF Driver | 1 x JBL 2265H 380mm (15 in) Differential Drive driver with 75mm (3 in) voice coil |
| Sensitivity (1W @ 1m, Low Frequency) | 97 dB SPL |
| MF Driver | JBL CMCD-82H Cone Midrange Compression Driver with integral 200mm (8 in) diameter Differential Drive dual voice coil internal driver |
| Sensitivity (1W @ 1m, Midrange) | 108 dB SPL |
| HF Driver | JBL 2432H, 38mm (1.5 in) exit compression driver, 75mm (3 in) voice coil |
| Sensitivity (1W @ 1m, High Frequency) | 115 dB SPL |
| Enclosure | Trapezoidal with 15 degree side angles, 16mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
| Suspension Attachment | 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Finish | Black DuraFlex finish; white available upon request |
| Grille | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Connector | NL8 Neutrik Speakon and CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop through |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Dimensions (H x W x D, vertical orientation) | 967 x 561 x 657mm (38.1 x 22.1 x 25.9 in) |
| Net Weight (each) | 45.8 kg (101 lb) |
| Optional Accessories | M10 x 35mm forged shoulder eyebolts with washers; optional planar array frame kit (see AE Series Bracket Guide) |
| Nominal LF Driver Impedance | 8 ohms |
| Nominal MF Driver Impedance | 8 ohms |
| Nominal HF Driver Impedance | 8 ohms |
| Additional Specifications | |
| Configuration | 3-Way |
| Mounting Information | |
| Net Weight | 45.81 kg / 101 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 15" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 38 Hz – 20 kHz | HF Driver | JBL 2432H, 38mm (1.5 in) exit compression driver, 75mm (3 in) voice coil |
| Frequency Response (±3 dB) | 45 Hz – 18 kHz | Sensitivity (1W @ 1m, High Frequency) | 115 dB SPL |
| Coverage Pattern | /64: 60° x 40°, rotatable waveguide; /95: 90° x 50°, rotatable waveguide | Enclosure | Trapezoidal with 15 degree side angles, 16mm (5/8 in) exterior grade 11-ply Finnish birch plywood |
| Directivity Index (DI) | 13 dB | Suspension Attachment | 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Crossover Modes | Tri-amp/Bi-amp switchable | Finish | Black DuraFlex finish; white available upon request |
| Crossover Frequencies | 300 Hz and 2.3 kHz | Grille | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Transducer Power Rating (AES) | LF: 1000W (4000W peak), 2 hrs, 750W (3000W peak), 100 hrs; MF: 350W (1400W peak), 2 hrs; HF: 100W (400W peak), 2 hrs | Input Connector | NL8 Neutrik Speakon and CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop through |
| System Power Rating | LF: 600W (2400W peak), 100 hrs; MF/HF: 200W (800W peak), 100 hrs | Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Maximum SPL (1m) | LF: 127 dB SPL cont avg (133 dB peak); Tri-amp mode: MF 133 dB SPL cont avg (139 dB peak), HF 135 dB SPL cont avg (141 dB peak); Bi-amp mode: MF/HF 133 dB SPL cont avg (139 dB peak) | Dimensions (H x W x D, vertical orientation) | 967 x 561 x 657mm (38.1 x 22.1 x 25.9 in) |
| System Sensitivity of Passive Sections (1W @ 1m) | MF/HF Section in Bi-amp mode: 108 dB SPL | Net Weight (each) | 45.8 kg (101 lb) |
| Nominal Impedance | 8 ohms | Optional Accessories | M10 x 35mm forged shoulder eyebolts with washers; optional planar array frame kit (see AE Series Bracket Guide) |
| LF Driver | 1 x JBL 2265H 380mm (15 in) Differential Drive driver with 75mm (3 in) voice coil | Nominal LF Driver Impedance | 8 ohms |
| Sensitivity (1W @ 1m, Low Frequency) | 97 dB SPL | Nominal MF Driver Impedance | 8 ohms |
| MF Driver | JBL CMCD-82H Cone Midrange Compression Driver with integral 200mm (8 in) diameter Differential Drive dual voice coil internal driver | Nominal HF Driver Impedance | 8 ohms |
| Sensitivity (1W @ 1m, Midrange) | 108 dB SPL | ||
| Additional Specifications | |||
| Configuration | 3-Way | ||
| Mounting Information | |||
| Net Weight | 45.81 kg / 101 lbs | ||
Questions about this speaker? Our pro audio team is here to help.