AE Series
SKU AM5212/00
The AM5212 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 262H-1 300mm (12 in) low frequency driver and 2408H-1 high frequency 38mm (1.5 in) exit, 38mm (1.5 in) voice-coil compression driver.
| Overview | |
|---|---|
| |
| Specifications | |
| Size | 12" |
| Specifications | |
| Frequency Range (-10 dB) | 37 Hz – 20 kHz |
| Frequency Response (±3 dB) | 43 Hz – 20 kHz |
| Coverage Pattern | /64: 60° x 40°; /66: 60° x 60°; /95: 90° x 50°; /00: 100° x 100°; /26: 120° x 60° |
| Crossover Modes | Bi-amp/Passive switchable |
| Passive Crossover Frequency | 1.5 kHz |
| Transducer Power Rating (AES) | LF: 400W (1600W peak), 2 hrs, 300W (1200W peak), 100 hrs; HF: 40W (160W peak), 2 hrs |
| System Power Rating | Passive mode: 300W (1200W peak), 100 hrs (IEC rated) |
| Maximum SPL (1m) | Bi-amp mode: LF 122 dB, HF 131 dB |
| System Sensitivity (1W @ 1m) | Passive mode: 96 dB SPL |
| LF Driver | 1 x JBL 262H-1 300mm (12 in) driver with 50.8mm (2 in) dual voice coil |
| Nominal Impedance | 8 ohms |
| Sensitivity (1W @ 1m, within operational band) | 97 dB SPL |
| HF Driver | JBL 2408H-1, 38mm (1.5 in) exit compression driver, 38mm (1.5 in) voice coil |
| HF Sensitivity | 113 dB SPL |
| Waveguide | PT-H126HF-1 |
| Enclosure | Trapezoidal with 15 degree side angles, 16mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Finish | Black DuraFlex finish; white available upon request |
| Grille | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop-through |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Dimensions (H x W x D, vertical orientation) | 713 x 371 x 458mm (28.06 x 14.6 x 18.1 in) |
| Net Weight (each) | 20.2 kg (45 lb) |
| Optional Accessories | M10 x 35mm forged shoulder eyebolts with washers; U-Bracket MTU-3 |
| Nominal LF Driver Impedance | 8 ohms |
| Nominal HF Driver Impedance | 8 ohms |
| Additional Specifications | |
| Configuration | 2-Way |
| Mounting Information | |
| Net Weight | 20.41 kg / 45 lbs |
| Overview | |||
|---|---|---|---|
| |||
| Specifications | |||
| Size | 12" | ||
| Specifications | |||
| Frequency Range (-10 dB) | 37 Hz – 20 kHz | HF Sensitivity | 113 dB SPL |
| Frequency Response (±3 dB) | 43 Hz – 20 kHz | Waveguide | PT-H126HF-1 |
| Coverage Pattern | /64: 60° x 40°; /66: 60° x 60°; /95: 90° x 50°; /00: 100° x 100°; /26: 120° x 60° | Enclosure | Trapezoidal with 15 degree side angles, 16mm (5/8 in) exterior grade 11-ply birch plywood |
| Crossover Modes | Bi-amp/Passive switchable | Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Passive Crossover Frequency | 1.5 kHz | Finish | Black DuraFlex finish; white available upon request |
| Transducer Power Rating (AES) | LF: 400W (1600W peak), 2 hrs, 300W (1200W peak), 100 hrs; HF: 40W (160W peak), 2 hrs | Grille | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| System Power Rating | Passive mode: 300W (1200W peak), 100 hrs (IEC rated) | Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals, accepts up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs; Speakon in parallel with barrier strip for loop-through |
| Maximum SPL (1m) | Bi-amp mode: LF 122 dB, HF 131 dB | Environmental | Mil-Std 810; IP-x3 per IEC529 |
| System Sensitivity (1W @ 1m) | Passive mode: 96 dB SPL | Dimensions (H x W x D, vertical orientation) | 713 x 371 x 458mm (28.06 x 14.6 x 18.1 in) |
| LF Driver | 1 x JBL 262H-1 300mm (12 in) driver with 50.8mm (2 in) dual voice coil | Net Weight (each) | 20.2 kg (45 lb) |
| Nominal Impedance | 8 ohms | Optional Accessories | M10 x 35mm forged shoulder eyebolts with washers; U-Bracket MTU-3 |
| Sensitivity (1W @ 1m, within operational band) | 97 dB SPL | Nominal LF Driver Impedance | 8 ohms |
| HF Driver | JBL 2408H-1, 38mm (1.5 in) exit compression driver, 38mm (1.5 in) voice coil | Nominal HF Driver Impedance | 8 ohms |
| Additional Specifications | |||
| Configuration | 2-Way | ||
| Mounting Information | |||
| Net Weight | 20.41 kg / 45 lbs | ||
Questions about this speaker? Our pro audio team is here to help.