
4-zone DSP mixer-amplifier that processes 12 audio inputs into four independent zones from a single 1U rack space, ideal for churches, restaurants, schools, retail and office/warehouse complexes
Two-Channel, 150W @ 4Ω
2
Channels
150W
per ch @ 4Ω
1U
Rack Space
13 lbs
Weight
Class D
Amplifier
Onboard DSP
Processing
| Overview | |
|---|---|
|
| Power & Performance | |
|---|---|
| Channels | 2 |
| Power per Channel @ 2/4 Ohms | 150 W |
| Bridged @ 4 Ohms | 300 W |
| Bridged @ 2/8 Ohms | 150 W |
| 25V/70V/100V Output per Channel | 150 W |
| Damping Factor | > 250 (8 Ohm, <1kHz) |
| Distortion | < 0.5% (8 Ohm, 10dB below rated power) (SMPTE / THD-N, typical) |
| Frequency Response | 20 Hz - 20 kHz, +/-0.05 dB |
| Channel Separation | -75 dB |
| Power Supply & Physical | |
|---|---|
| Dimensions | 19" W x 1.75" H x 14.54" D (1 RU) |
| Weight | 13 lbs / 5.4 kg |
| Shipping Weight | 18 lbs / 8.2 kg |
| Power Supply | SMPS with active PFC, 100-240VAC (70-270VAC operating range) |
| Power Connector | Detachable NEMA 5-15 |
| Cooling | Continuously variable temperature-controlled fan |
| Inputs, Outputs & Control | |
|---|---|
| Mic/Line Inputs | 8 balanced, Euroblock 3.5mm, Class A preamps, switchable 48V phantom power |
| Stereo Line Inputs | 4 unbalanced RCA (-10dBV) |
| AUX Outputs | 2 balanced, Euroblock 3.5mm |
| Speaker Outputs | 2, Euroblock 7.62mm |
| Zones | 4 independent output zones with matrixing, auto-mix and ducking |
| Input Processing | Gain, VCA/DCA/Remote Gain, 10-band PEQ, 31-band Graphic EQ, HPF/LPF, Compressor, Auto-Leveler, Brick Wall Limiter, Gate, Feedback Suppressor, Delay, Signal Generator, Meter |
| Output Processing | Same as inputs plus Ambient Noise Compensation, FIR Filters, 2/3/4-way Crossover |
| Mixers | 4, each with Gain, Meter, Auto-Mix, Ducker |
| Scheduler | Real-Time Clock event scheduler, syncable to PC/NTP |
| Processors | 32-bit A/D-D/A, 32-bit floating point DSP, 48kHz sample rate |
| Control Network | RJ-45, 1GB Ethernet |
| GPIO | 8x GPI, 2x GPO, 2x Amp Fault, 3x VC Remote, 1x Serial Data, 1x Standby |
| Compatible Remotes | WR-1, WR-1.1, WR-1.5, WR-2 |
Questions about this amplifier? Our pro audio team is here to help.